Doc:2.6/Manual/Animation/Editors/NLA

提供: wiki
移動先: 案内検索

Non-Linear Action Editor

The NLA editor (Non-Linear Animation Editor) can manipulate and repurpose actions, without the tedium of keyframe handling. Its often used to make broad, significant changes to a scene's animation, with relative ease. It can also repurpose, and 'layer' actions, which make it easier to organize, and version-control your animation.

The NLA Editor interacts with the Graph Editor and the DopeSheet. So, in a way, you will take into account all three simultaneously.

Interface

Since other animation editor, NLA Editor is divided in three parts:

NLA Editor window:
1. Track Region (NLA-stack).
2. Strip Edit Area.
3. Header.

Track Region or NLA-stack is the stack of animation layers (these are more akin to GIMP/Photoshop Layers than Blender 3D-View "Layers"). These "layers" are officially known as "NLA Tracks". Order of evaluation the NLA-stack is from "bottom up", with the active action being the last thing evaluated on top of the NLA-stack results.

Strip Edit Area — the main edit area of the NLA Editor where is occur the action strips editing.

Header — the menu and controls bar. Its content largely is similar to header other animation editors, like Graph Editor, Dope Sheet Editor and Timeline window.

View, Select and Marker menus, in particular, have a same items that ones in the editors described above.

Edit and Add menus are specific for NLA Editors and is described in this section below.

Tracks

Tracks are the layering system of the NLA. At its most basic level, it can help organize strips. It layers motion much like how an image editor layers pixels---the bottom layer first, to the top, last. Sometimes the top information completely dominating, or sometimes with them blending in transparently.

Here, BottomTrack is like the background layer, MiddleTrack is in between, and NlaTrack.002 is on top, so conflicting keyframes will be overridden by layers above.


Initial Setup

The first step in using the NLA is creating one or more Actions. By default, the Action Editor automatically stores the keyframes you create through the 3D View by storing them into an action based on the name as the object you are working on.

First, get your views set up so you can see what is going on. Load the Default Scene (CtrlN), and switch layouts either by hitting Ctrl or by clicking the dropdown:

Change the Screen Layout to Animation. This will give us some windows that are more or less ready for animating.


Now, since we are interested in the NLA Editor, load that instead of the Graph Editor:

Replace the Graph Editor window (the middle one on the left), with the NLA Editor window.


You will probably want to do some re-sizing so you can see the NLA Editor better.

And now to use the tools you have open. Here are the steps to make a simple CubeAction:

  1. Load the Default Scene
  2. Select the Default Cube, and hit IL to keyframe its location. With this single pair of keystrokes what you actually did was:
    • Create the CubeAction and give it three channels: X, Y, and Z Location. You can see this if you look in the DopeSheet/Action Editor window (See first image, below).
    • Place that Action into the orange "DopeSheet Track" in the NLA Editor. (See second image, below.)
  3. Now, to complete the animation, go to Frame 11 by hitting ⇧ Shift
  4. In the 3D View hit G⇧ ShiftZ and scoot the default Cube to some random location.
  5. Hit IL to save the location channel data to a new set of keyframes. (Remember, "Go to the frame, make the change, insert the keyframe.")
  6. Test it out with AltA (Esc to stop).

The animation windows should now look something like this:

Your first keyframe appearing in the DopeSheet Window. You can find it in the upper-left window of the Animation screen layout.
Your first insertion into an NLA Track, the special "Orange DopeSheet Track".


Track Controls

Several features are packed into a small space near the Track names.

The Track iconic controls: Solo, Mute, and Lock.

To the left of each track's name is the star icon. Clicking this is a "Solo Track" feature, causing only this track's effects to be visible when animating. This is very useful for debugging complex animations. As the name implies, you can only have one "Solo" track enabled at a time. Clicking the star (which is now orange) a second time returns to normal operation.

To the right of the track's name is the speaker icon, which is the opposite of the star---it "mutes" the track and keeps it from having an effect on the animation. You can click as many or as few of these as you like.

The lock prevents changes from being made to this layer. This is useful, for example, if you want to select several strips and move them — but you want to keep a few tracks excluded from the change.

Creating and deleting tracks

Creating new tracks is making with two items Add Tracks and Add Tracks Above Selected from Add menu NLA Editor header.

Tracks can be to move in the NLA-stack after their selecting with submenu items Track Ordering... from Edit menu.

Tracks removing is making after their selecting by default hotkey X.

Strips

Strip is a container for action instances.

Strip Types

There are three kinds of strips - Action, Transition, and Meta.

Action Strip.
  • An Action Strip is a container of keyframe data of an action (though they may be shortened, scaled, repeated, et cetera).
Transition Strip.
  • Transitions perform calculations between Actions. They must be placed sandwiched between other strips.
Shift-select two or more strips..
Combine them into a meta strip with ⇧ ShiftG. You can break them apart again with AltG
  • Meta groups strips together as a whole, so you can move them as one. If you find yourself moving a lot of strips together, it would help to organize them into Meta strips.

Creating Strips

Creating Action Strips

Now that you have some Actions, there are two ways to create Action Strips.

The first is by making an Action Strip out of the currently-loaded keyframes that are in the DopeSheet by clicking the pushdown action button (NLA Pushdown action.png) next to the Track name in the NLA Editor. Once you do this, you might have to zoom in with your scroll wheel or with ↖ Home to see it better.

After clicking the Pushdown action button, you have created your first Action Strip in its own Track named NlaTrack.

The second way to add Action Strips is by adding them manually with ⇧ ShiftA. Alternatively, you can to use menu item:

Menu: Add → Add Action Strip

Note that it must have at least one track to be created on, so you might have to first go to the Add menu and Add Tracks.

Creating Transition Strips

Select two or more strips on the same track, and go to

Menu: Add → Add Transition

Grouping and ungrouping Strips into/from Meta Strips

If you find yourself moving a lot of strips together, you can group them into a Meta strip. A meta strip can be moved and duplicated like a normal strip.

Hotkey: ⇧ ShiftG

Menu: Add → Add Meta-Strips

A meta strip still contains the underlying strips. You can ungroup a Meta strip.

Hotkey: AltG

Menu: Add → Remove Meta-Strips

Deleting Strips

Strips can be delete after their selecting by default hotkey X or Delete Strips item in Edit menu of NLA Editor header.

Editing Strips

The contents of Action strips can be edited, but you must be in 'Tweak Mode' to do so.

Hotkey: ⇆ Tab

Menu: Edit → Start Tweaking Strip Actions

Strip in NLA mode..
Strip in Tweak mode.

As soon as you hit ⇆ Tab on an Action, it throws that Action's keyframes into the DopeSheet for manipulation.

The currently-tweaked Action will go into the Editor.

If you try moving the strip, while in edit mode, you'll notice that the keys will go along with it. On occasion, you'll prefer the keys to remain on their original frames, regardless of where the strip is. To do so, hit the 'unpin' icon, next to the strip.

Nla strip with pinned keys.
Strip moved, notice the keys move with it.
The unpinned keys return to their original frames.

When your finished editing the strip, simply exit Tweak mode with ⇆ Tab.

Strip ordering

Move Strips Down
Move selected strips down a track if there’s room.
Move Strips Up
Move selected strips up a track if there’s room.
Swap Strips
Swap order of selected strips within tracks.

Basic Editing

Once you have created it, you can perform some manipulations on it, such as G to move, S to scale (and by fiddling with the controls in the N Properties Panel, but more on that later).

Transform
Grab/Move
Extend
Scale
Apply Scale
Apply scaling of selected strips to their referenced Actions.
Clear Scale
Reset scaling of selected strips.
Sync Action Lenght
Synchronize the length of the referenced Action with the length used in the strip.
Snap
Current Frame
Nearest Frame
Nearest Second
Nearest Marker

Spliting Strips

Strips can be spliting in two ones by Edit item menu:

Split Strips
Split selected strips at their midpoints.


Re-Instancing and duplicating Strips

The contents' of one Action strip can be instanced multiple times. To instance another strip, select a strip, and

Hotkey: AltD

Menu: Edit→ Linded Duplicate

Now, when any strip is tweaked, the others will change too. If a strip other than the original is tweaked, the original will turn to red.

Original strip.
Duplicated strip.
Duplicated strip being edited.

Another duplicating command:

Duplicate ⇧ ShiftD
Just duplicate selected NLA-Strips, adding the new strips in new tracks above the originals.


Strip Properties

Strip properties can be made visible by:

Hotkey: N

Menu: View→ Properties

Note that, like most things in Blender, these values themselves can be keyframed and animated. This means you could have a repeating action whose rate slows down over time, for example.

Animation Data

Manual-Animation-Editors-NLA N-PropertiesPanel.00.png

The first box is the same as what you see in the Action Editor window. It allows you to choose, create, copy, and unlink actions based on the contents of the Orange track.

  • Action Extrapolation - Action to take for gaps past the strip extents. Can be either
    • Hold (Affects both sides of the strip)
    • Hold Forward (Affects the region after the clip, only)
    • Nothing (Neither).
  • Action Blending - Affects the behavior when two tracks simultaneously have a curve affecting the same property. The default, Replace, causes the top strip to take precedence according to the parameters of the Blend In/Out (see next option, below). It can also be Multiply, Subtract, or Add.

Active Track

Manual-Animation-Editors-NLA N-PropertiesPanel.01.png

Here is one simple control which gives you the ability to rename tracks something other than NLATrack*.

Active Strip

Rename a strip
Manual-Animation-Editors-NLA N-PropertiesPanel.02.png
  • Name - Rename a strip (defaults to being named the same as the Action it contains).
  • Type - Will either say "Action Clip", "Transition", or "Meta", according to the three types of strips.
  • Strip Extents - The boundaries of the strip itself. Note that this will stretch the duration of the Action, it will not cause greater or fewer keyframes from the Actions to play (see below for that option).
  • Extrapolation - (See Action Extrapolation, above.)
  • Blending - (See Action Blending, above.)
  • Auto Blend In/Out -- Creates a ramp starting at the overlap of the strips. The first strip has full control, and it ramps linearly giving the second strip full control by the end of the overlapping time period.
  • Blend In - Set the frame that represents when this strip will have full influence.
  • Blend Out - Set the last frame of this strip's full influence.
  • Muted - Mute a single strip (like muting the track, above). Causes the track outline to be dashed.
  • Reversed - Cause this strip to be played completely backwards.

Action Clip

Manual-Animation-Editors-NLA N-PropertiesPanel.03.png
  • Action - A reference to the Action contained within the strip. Can be changed to replace the current strip's value with another Action.
  • Action Extents - How much of the Action to use.
    • For instance, it is common to set the first and last keyframe of an Action to be the same keyframes. The problem with this is if you loop the animation, there is a slight hitch where the same keyframes are played twice. To fix this, simply bump the "End Frame" down by one.
    • Note: If you select values that are above or below the actual keyframe count of the Action, then the F-Curve Extrapolation will be consulted. (Which can be changed in the Graph Editor, under Channel > Extrapolation Mode.
  • Sync Action Lenth - Causes the "Start" and "End" Frames, above, to be reset to the first and last keyframed frames of the Action.
  • Playback Settings
    • Scale - Stretches strip, another way of increasing the Strip Extents: End Frame, above.
    • Repeat - Also expands the strip, but by looping from the first keyframe and going forward.

Evaluation

Manual-Animation-Editors-NLA N-PropertiesPanel.04.png
  • Animated Influence - Enabling alteration of the degree of influence this strip has as a keyframable value. If influence isn't animated, the strips will fade linearly, during the overlap.
  • Animated Strip - Same as Animated Influence, but with Strip Time.
  • Cyclic Strip Time - Cycle the animated time within the action start and end.

Modifiers

Modifiers.png

The NLA Editor allows, like for a single F-curve, also add F-Curves Modifiers to the selected NLA-Strips (sets of multiply F-curves):

Generator
Generate a curve using a factorized or expanded polynomial.
Built-In Function
Generate a curve using standard math functions such as sin and cos.
Envelope
Reshape F-Curve values - e.g. change amplitude of movements.
Cycles
Cyclic extend/repeat keyframe sequence.
Noise
Add pseudo-random noise on top of F-Curves.
Python
Use Python script to generate values over time that are relayed to the parameter they are assigned to
Limits
Restrict maximum and minimum values of F-Curve.
Stepped Interpolation
Snap values to nearest grid-step - e.g. for a stop-motion look.

See more detail in corresponding section about F-Curves Modifiers.