Doc:2.6/Manual/Textures/Mapping/UV/Applying Image

提供: wiki
移動先: 案内検索


Page status (reviewing guidelines)

Page reviewed and in good shape

Applying Textures

Sooner or later, you may want to use an image texture on your model. If you are using an external application, you need to know where on the mesh you are painting. You may also need to test your UV mapping with a test image. This section covers how to export an outline of your UV map, and how to load images into the UV editor.

Exporting UV Layout Image

As a way of communicating to an artist who is painting your UV Texture for you, Blender has a tool called Save UV Face Layout (located in the UV/Image Editor Window, UVs->Save UV Face Layout) that saves an image as a Targa (.tga), EPS, or an SVG format for the object you have selected.

The image is an outline of the UV face mapping. Activating the tool brings up the File Browser Window with options for saving the layout:

Export options
All UVs
if disabled, then only the UV faces selected will be outlined
Modified
Export UVs from the modified mesh.
Format
Select the type of image file to save (.png, .eps, .svg)
Size
select the size of the image in pixels. The image be square.
Fill Opacity
Set the opacity of the fill

The image will be lines defining the UV edges that are within the image area of the UV mapping area. Edges outside the boundary, even if selected, will not be shown in the saved graphic.

The artist will use this as a transparent layer in their paint program as a guide when painting your texture. The example below shows Blender in the background, and the Gimp working on the texture, using the saved layout as a guide. Note that targa format supports the Alpha channel, so you can paint transparent areas of the mesh.

For using images as textures, see the page on Image Textures


A uv layout in the uv editor
A snapshot of the uv layout to be used in an image editor


Applying Textures to UVs

The UV/Image Editor allows you to map textures directly to the mesh faces. The 3D View window shows you the object being textured. If you set this window into Textured viewport shading, you will immediately see any changes made in the UV/Image Editor window in this window, and vice versa.

You can edit and load images, and even play a game in the Blender Game Engine with UV textures for characters and object, without a material, and still see them in the 3D window. This is because no 'real' rendering is taking place; it is all just viewport shading. If you were to apply an image to UVs then render, the texture would not show up by default

To render an image however, you must

  1. create a Material for the object, and
  2. tell Blender to use the UV Textures on faces when rendering.

To create a Material, you have to click Add New Material in the Shading context.

There are two ways to tell Blender to use the UV Texture when rendering: the Proper way and the Quick Way:

Use UV Coordinates

A texture setup to map using its UV coordinates

In the Texture channel panel, Add a New Texture and define the texture as an image and load the image you want to use. In the Mapping section, choose UV from the Coordinates menu, and select the UV layer to use.

Make sure it is mapped to Color in the Influence section as well (it will be mapped to Color by default, and the UV Texture is named "UVTex" by default). If the image has an alpha channel and you want to use it, click "UseAlpha" in the Map Image panel.

Full details of using Image textures are on the Image Textures page.

Material is Required for Rendering
You can perform UV Texturing on a mesh within Blender without assigning a material, and you will even see it in your 3D View in textured viewport mode. However, when you render, you will just get a default gray if the object does not have a Material assigned. You will get a black if you do not load an image. If you do not create a texture that uses the image, or enable Face Texture, your object will render according to the procedural material settings.


Face Textures

The Material panel with activated Face Textures button.

An alternate way is to set up a Face Textures Material as shown. To do so, with the buttons window displayed, press F5 to display the Shader Buttons. In the Buttons window, Material settings, click ADD NEW material.

On the Options panel, enable Face Textures. This way is quick, but bypasses the normal rendering system for fast results, but results which do not respect transparency and proper shading.


Loading and Saving Images

In the UV editor, you can assign certain faces certain textures. To do so, first you need an image to work with. In the Image Menu you can open an image file with the File Browser. If you have images in the file already, that you want to use, click the Browse button in the Header, or make a new texture by clicking the New button.

In a team environment, or if you are using an external paint program to edit the image while the .blend file is active, and the file is updated and re-saved, use the UV/Image Editor to Image->Reload it and see the latest and greatest in Blender. Also, use Reload if you have mapped more faces to an image, and the 3D View will be updated with the latest image mapping back to faces.

If you move the image file, Blender may not be able to find it, and you will have to Image->Replace it. Use this option to map a UV layout to a different image altogether.

Replacing the active Image

Recall that each face gets coordinates and a link to an image. To map a face to a different image, simply select that face (or faces) and use the UV/Image Editor window Image}} menu to Replace the current image with an existing file (such as a JPG or PNG file).

New Images

The new Image dialogue

When you select New Image you are presented with several options. This Generated image can also be modified afterward in the Properties Panel:

Image Name
Set the name if the generated image
Width and Height
Set the size if the image in pixels
Color
Sets the the default fill color if creating a blank image.
Alpha
Adds an alpha channel to the image
Generated Type
The type of image to generate:
UV Grid
Creates a checkerboard pattern with a colored + in each square.
Color Grid
Creates a UV Test Grid, which is useful for testing how UVs have been mapped, and to reduce stretching. There are two types available, which can be set after the image has been created.
Blank
Generates a blank image of the specified color.
32 bit
Creates a 32 bit image. This is a larger file size, but holds much more color information than the standard 8 bit image. For close ups and large gradients, it may be better to use a 32 bit image.

Using the Test Grid

Use the UV Test Grid option to check for undue stretching or distortion of faces. If your image is a base uniform pattern and you want the application of that image to your model to look like cloth, you do NOT want any stretching (unless you want the cloth to look like spandex).

The test grid applied to the UVs
A preview of the texture on the geometry


When you render, the mesh will have the test grid as its colors, and the UV Texture will be the size image you specified. You can save the UV image using the Image->Save menu.

Image Settings

«Image» section on «Properties» panel in UV/Image Editor

When an image has been loaded or created in the UV editor, an additional section appears in the Properties Panel. The first row of buttons allow you to:

  • Browse for an image
  • Change the image name
  • Set as Fake User
  • Create a New Image
  • Open an image
  • Unlink Datablock

Select the image type in the Source menu. Each has different options:

Generated
Generates a new image:
Width and Height of image in pixels
Blank
Creates a Blank image
UV grid
Creates a checkerboard pattern with colored plus symbols in each square.
Color Grid
Creates a more complex colored grid with letters and numbers denoting locations in the grid.
File
Use for loading image files:
Fields
Use if image is made of fields. You can set it to use Upper First or Lower First
Premultiply
Converts RGB from key alpha to premultiplied alpha.
Movie and Sequence
Frames
Set the number of frames to use
Start
Set the starting frame of the movie/sequence
Offset
Offset the number of frame used in the animation
Fields
Set the number fields per rendered frame to use(2 fields is 1 frame)
Auto Refresh
Always refresh images on frame changes.
Cyclic
Cycle the images in a movie/sequence.

Saving Images

Images can be saved to external files if they were created or edited in Blender with tools in the Image menu. If images are already files, use the Save command (AltS). You can also Save As (F3) if the image was generated or you want to save as a different name. Using Save as Copy, (F3) will save the file to a specified name, but will keep the old one open in the Image editor.

Modifying your Image Texture

To modify your new Texture, you can:

  • Render Bake an image based on how the mesh looks
    • The Render Bake feature provides several tools to replace the current image based on a render of Vertex Paint colors, Normals (bumps), Procedural materials, textures and lighting, and ambient occlusion.
  • Paint using Texture Paint.
    • Use the UV/Image Editor menu Image->New. Then start painting your mesh with
  • Use external software to create an image
    • Using your favorite image painting program, you could use an exported UV layout to create a texture. Then save your changes, and back in Blender, use the Image->Open menu command to load it as your UV image for the mesh in Face Select Mode for the desired (and active) UV Texture layer. Using the Edit Externally tool in the Image menu, Blender will open an image editor, as specified in the User Preferences and load in the image to be edited.
  • Use the "projection painting" feature of recent versions of Blender
  • Use the Bake uV-Textures to Vertex Colors addon to create an image from vertex colors
  • Some combination of the above.

The first three options, (UV Painter, Render Bake, and Texture Baker) replace the image with an image that they create. Texture paint and external software can be used to add or enhance the image. Regardless of which method you use, ultimately you must either

  • save your texture in a separate image file (for example JPG for colors, PNG with RGBA for alpha),
  • pack the image inside the blend file (UV/Image Editor Image->Pack as PNG),
  • or do both.

The advantage to saving as a separate file is that you can easily switch textures just by copying other image files over it, and you can use external editing programs to work on it. The advantage of packing is that your whole project is kept in the .blend file, and that you only have to manage one file.

You can invert the colors of an image by selecting the Invert menu. in the Image menu



Packing Images inside the Blend file

If you pack your .blend file, the current version of all UV Texture images are packed into the file. If those files later change, the updates will not be automatically re-packed; the old version of the image is what will be used. To update, you will have to re-pack or reload.

To pack an image, select Pack Image from the Image menu. To Unpack, select this option again and select Remove Pack.

The File->Append function automatically goes into .blend files and shows you the image textures packed in it. The public domain Blender Texture CD is also a great resource, and there are many other sources of public domain (and licensed) textures. All textures on the Elephants Dream CD are liberally licensed under CC-BY 2.5.