Doc:2.6/Manual/Rigging/Armatures/Visualization

提供: wiki
< Doc:2.6‎ | Manual‎ | Rigging‎ | Armatures
2014年9月7日 (日) 18:16時点におけるwiki>Urkokulによる版 (Bone types)
(差分) ← 古い版 | 最新版 (差分) | 新しい版 → (差分)
移動先: 案内検索

Armature visualization

We have 5 basic bone visualization: Octahedral, Stick, B-Bone, Envelope and Wire:

Octahedral bone display.
Stick bone display.


B-Bone bone display.
Envelope bone display.
Wire bone display.


Display Panel

Mode: Object, Edit and Pose modes

Panel: Display Object Data context

But let’s first see some general visualization properties of armatures, found in the Display panel of the Object data context.

The Display panel.

Bone types


A basic armature in Octahedron visualization, Edit mode.
Note the 40° rolled Bone.001 bone.

Octahedral bone

This is the default visualization, well suited for most of editing tasks. It materializes:

  • The bone root (“big” end) and tip (“small” end).
  • The bone “size” (its thickness is proportional to its length).
  • The bone roll (as it has a square section).


The same armature in Stick visualization, Pose mode.
Note that Bone.001 roll angle is not visible (except by its XZ axes).

Stick bone

This is the simplest and most non-intrusive visualization. It just materializes bones by sticks of constant (and small) thickness, so it gives you no information about root and tip, nor bone size or roll angle.

The same armature in B-Bone visualization, Edit mode.

B-Bone bone

This visualization shows the curves of “smooth” multi-segmented bones; see the bone page for details.

The Envelope visualization.

Envelope bone

This visualization materializes the bone deformation influence. More on this in the bone page.

Attributes

Names
When enabled, the name of each bone is drawn.
Colors
This is only relevant for Pose mode, and is described in detail there.


Axes
When enabled, the (local) axes of each bone are drawn (only relevant for Edit and Pose modes).
X-Ray
When enabled, the bones of the armature will always be drawn on top of the solid objects (meshes, surfaces, …) – i.e. they will always be visible and selectable (this is the same option as the one found in the Display panel of the Object data context. Very useful when not in Wireframe mode.
Shapes
When enabled, the default standard bone shape is replaced, in Object and Pose modes, by the shape of a chosen object (see below for details).
Delay Refresh
When enabled, the bone doesn't deform its children when manipulating the bone in pose mode.

Shaped Bones

Mode: Object and Pose modes

Panel: Display panel from Bone context.

Blender allows you to give to each bone of an armature a specific shape (in Object and Pose modes), using another object as “template”. First of all, you have to enable the Shapes button (Armature panel).

The Display panel.

Attributes

Wireframe
When enabled, bone is displayed in wireframe mode regardles of the viewport drawing mode. Useful for non-obstructive custom bone chains.
Hide
Bone is not visible when not in Edit mode.
Custom Shape
Object that defines the custom shape of the selected bone.
Custom At
Bone that defines the display transform of this shape bone


To assign a custom shape to a bone, you have to:

  • Switch to Pose mode (Ctrl⇆ Tab).
  • Select the relevant bone (RMB Template-RMB.png click on it).
  • Go to the Display panel Custom Shape field and select the 3D object previously created in the scene; in this example we are using a cube and a cone. Tou can optionally set the At field to another bone.
The Display panel.


The armature with shapes assigned to two bones, in Object mode.
Note the centers of the Cone and Cube objects.
The same armature in Pose mode…


Note that:

  • These shapes will never be rendered – like any bone, they are only visible in 3D views.
  • Even if any type of object seems to be accepted by the OB field (meshes, curves, even metas…), only meshes really work – all other types just make the bone invisible; nothing is drawn…
  • The center of the shape object will be at the root of the bone (see the bone page for root/tip).
  • The object properties of the shape are ignored (i.e. if you make a parallelepiped out of a cube by modifying its dimensions in Object mode, you’ll still have a cube shaped bone…).
  • The “along bone” axis is the Y one, and the shape object is always scaled so that one Blender Unit stretches along the whole bone length.
  • If you need to remove the custom shape of the bone, just right click in the Custom Shape field and select Reset to default value in the popup menu.

So to summarize all this, you should use meshes as shape objects, with their center at their lower-Y end, and an overall Y length of 1.0 BU.

Armature Layers

Mode: Object, Edit and Pose modes

Panel: Skeleton panel, Object data context


The Skeleton panel.

Each armature has 32 “Armature layers” which allow you to organize your armature by “regrouping” sets of bones into layers; this works similar to scene layers (those containing your objects). You can then “move” a bone to a given layer, hide or show one or several layers, etc.

Showing/hiding bone layers

Only bones in active layers will be visible/editable – but they will always be effective (i.e move objects or deform geometry), whether in an active layer or not. To (de)activate a layer, you have several options, depending in which mode you are in:

  • In all modes, use the row of small buttons at the top of the Display Options group, Armature panel. If you want to enable/disable several layers at once, as usual, hold ⇧ Shift while clicking…
  • In Edit and Pose modes, you can also do this from the 3D Views, either by using the menu (Armature » Switch Armature Layers or Pose » Switch Armature Layers), or the ⇧ ShiftM shortcut, to display a small pop-up dialog containing the same buttons as described above (here again, you can use ⇧ ShiftLMB Template-LMB.png clicks to (de)select several layers at once).


Protected Layers

You can lock a given bone layer for all proxies of your armature, i.e. all bones in this layer won’t be editable. To do so, in the Skeleton panel, CtrlLMB Template-LMB.png click on the relevant button, the layer lock will be enabled.

Protected layers in proxy are restored to proxy settings on file reload and undo.

Bone Layers

Mode: Object, Edit and Pose modes

Panel: Relations panel Bone context


The Relations panel.

Moving bones between layers

Obviously, you have to be in Edit or Pose modes to move bones between layers – note that as with objects, bones can lay in several layers at once, just use the usual ⇧ ShiftLMB Template-LMB.png clicks… First of all, you have to select the chosen bone(s)!

  • In the Button window, use the “layer buttons” of each selected bone “sub-panel” (Armature Bones panel) to control in which layer(s) it lays.
  • In the 3D View window, use the menu (Armature » Move Bone To Layer or Pose » Move Bone To Layer) or hit M to show the usual pop-up layers dialog. Note that this way, you assign the same layers to all selected bones.


Hiding Bones

Mode: Edit and Pose modes

Panel: Display panel, Bone context


The Display panel.

You do not have to use bone layers to show/hide some bones. As with objects, vertices or control points, you can use the H key:

  • H will hide the selected bone(s).
  • ⇧ ShiftH will hide all bones but the selected one(s).
  • AltH will show all hidden bones.

You can also use the Hide check button of the Display panel, Bone context).

Note that hidden bones are specific to a mode – i.e. you can hide some bones in Edit mode, they will still be visible in Pose mode, and vice-versa. Hidden bone in Pose mode are also invisible in Object mode. And in Edit mode, the bone to hide must be fully selected, not just his root or tip…